Sunday 15 April 2012

How to increase internet speed using CMD


This it what you need!
Run Cmd as Admin just right clik on cmd and do what i did.


1.)CD/


press Enter


2.)netsh int tcp show global
press Enter


3.)netsh int tcp set global chimney=enabled


press Enter


4.)netsh int tcp set global autotuninglevel=normal


press enter


5.)netsh int tcp set global congestionprovider=ctcp


press enter


6.)netsh int tcp show global


press enter and your done!

Just click ads to make money for me :)

34 comments:

  1. Before i have use some tips in to change browser setting. i tried this method is very simple and worked as good... after i checked my speed at scanmyspeed.com i published this... thanks..

    ReplyDelete
  2. i do no why,my internet is slow,

    ReplyDelete
  3. wow!! i've made it.. my int speed.. soo fast!! Thanks!!

    ReplyDelete
  4. thanks to all for good comments

    ReplyDelete
  5. it's not working, rather made my internet slow now i've to fix it

    ReplyDelete
  6. this is nice..it really works thanks

    ReplyDelete
  7. boosts for 10 seconds then goes extremely slow............

    ReplyDelete
  8. ? IT says command not found..

    ReplyDelete
  9. it's working...thanks for this!

    ReplyDelete
  10. upon entering "netsh int tcp set global congestionprovider=ctcp"
    it says perimeter incorrect........please tell me the fix

    ReplyDelete
  11. Thanks,

    Also I didn't see any adds to click to give you money!! Oh well I'll come back later to see if there are any some other time..




    kaytwizzelattya

    ReplyDelete
  12. 'netsh' is not recognized as an internal or external command

    ReplyDelete
    Replies
    1. I'm all good in the netsh' is not recognized as an internal or external command. My next problem is "netsh int tcp set global congestionprovider=ctcp" it says perimeter incorrect.So how to deal with this?

      Delete
  13. what is the default setings to roll back to the previous TCP /IP Settings?

    ReplyDelete
  14. it made my net almost 50 % slow. can u suggest some method to reverse it?

    ReplyDelete
  15. how do you enable time stamp ECN capability?

    ReplyDelete
  16. mmm i need to windows XP,windows 7 or windows 8

    ReplyDelete
  17. it is not working dude.
    i can't enable or disable anything.

    ReplyDelete
  18. error ocureed in this command netsh int tcp set global chimney=enabled so pleasae fix this

    ReplyDelete
  19. error ocureed in this command netsh int tcp set global chimney=enabled so pleasae fix this

    ReplyDelete
  20. error ocureed in this command netsh int tcp set global chimney=enabled so pleasae fix this

    ReplyDelete
  21. please say how to go for default action

    ReplyDelete
  22. #adlerfresse where you from ur brainless if its not working u should run administrator

    ReplyDelete
  23. ok It worked for me. My internet speed increse from 0.16MBits to 0.19MBits. Hmmmmmm ok you deserve where are adds on which I have to click :p

    ReplyDelete
  24. ok It worked for me. My internet speed increse from 0.16MBits to 0.19MBits. Hmmmmmm ok you deserve where are adds on which I have to click :p

    ReplyDelete
  25. Guys all latest devices, systems, modems and routers are capable for handling the speed in hundreds of MBytes. So no need to do anything for that as their capacities are good enough to tackle with the incoming link or wlan. What you can do for increased internet speed ..................? The only answer is to buy a high speed plan for your link or router.

    ReplyDelete
  26. it is ok if i use this in the shop

    ReplyDelete